Sinclair Full Synthetic Motor Oil
Passenger Car Motor Oil
Full Synthetic Motor Oil
Today’s engines are being designed by OEMs to be smaller, while producing more power. This change in design requires a brand of motor oil that has kept pace. And that’s just what you’ll get with Sinclair Full Synthetic Motor Oils. As engine designs have changed, so have our formulations and technology. And that means you can count on Sinclair to provide advanced oils that can stand up to the challenge of balancing your needs for protection, toughness and endurance.
Sinclair Full Synthetic Motor Oil features a 100% pure synthetic base oil along with our most progressive additive technology. It delivers our ultimate, longest-lasting engine protection, fuel efficiency, strength, and cleanliness.
And our technology also delivers a powerful, long-lasting, high-performance oil to control friction and keep metal surfaces from coming into contact.
Sinclair dexos1™ Approved Motor Oils meet or exceed GM dexos1™ specifications for warranty requirements for all GM automotive gasoline engines currently in use worldwide, and are fully licensed by GM.
Get increased engine life and ultimate levels of protection and endurance from the pure formulations of Sinclair Full Synthetic Motor Oils.
Sinclair Full Synthetic Motor Oils: Performance You'll Notice
Our synthetic oils have been specifically formulated and designed to provide:
Controls friction and wear over 80% better than current API requirements.¹
A strong oil film serves to resist metal-to-metal contact, even under stress.
Weathers heat and shearing to extend oil life.
¹ Based on Sequence IV Wear test.
|Viscosity Grade||Full Syn 0W-20||Full Syn 5W-20||Full Syn 5W-30|
|Boron, wt. %||ASTM D5185||0.023||0.007||0.023|
|Calcium, wt. %||ASTM D5185||0.135||0.119||0.135|
|Cold Cranking Simulator at (°C), cP||ASTM D5293||5800 (-35)||3518 (-30)||4400 (-30)|
|Flash Point °C||ASTM D92||226||228||227|
|Flash Point °F||ASTM D92||439||442||441|
|Foam Seq. III (Tendency/Stability), mL||ASTM D892 (Opt. A)||0/0||0/0||0/0|
|Foam Seq. II (Tendency/Stability), mL||ASTM D892 (Opt. A)||5/0||0/0||10/0|
|Foam Seq. I (Tendency/Stability), mL||ASTM D892 (Opt. A)||0/0||0/0||0/0|
|Gravity, °API||ASTM D287||35.66||35.62||35.82|
|High Temperature Foaming, static foam||ASTM D6082 (Opt A)||20/0||30/0||15/0|
|High Temperature / High Shear Vis at 150°C, cP||ASTM D5481||2.7||2.63||3.2|
|Magnesium, wt. %||ASTM D5185||0.059||0.038||0.059|
|Molybdenum, wt. %||ASTM D5185||0.0079||0.004||0.0079|
|Nitrogen, wt. %||ASTM D4629||0.104||0.081||0.104|
|Noack Volatility, % loss||ASTM D6375||13||10.3||12|
|Phosphorus, wt. %||ASTM D5185||0.076||0.064||0.076|
|Pour Point °C (°F)||ASTM D5950||-45°C (-49°F)||-45°C (-49°F)||-45°C (-49°F)|
|Pumping Viscosity at (°C), cP||ASTM D4684||21,000 (-40)||10,500 (-35)||15,000 (-35)|
|Shear Stability, Final Viscosity in cSt||ASTM D6278||7.5||7.565||9.4|
|Specific Gravity @ 60°F (15.6°C)||ASTM D4052||0.8465||0.8467||0.8457|
|Sulfated Ash, wt. %||ASTM D874||0.9||0.712||0.9|
|Sulfur, wt. %||ASTM D4951||0.3||0.235||0.3|
|TBN, mgKOH/g||ASTM D2896||7.9||7.0||7.9|
|Viscosity @ 100°C cSt||ASTM D445||8.475||8.33||10.91|
|Viscosity @ 40°C cSt||ASTM D445||44.59||44.9||62.09|
|Viscosity Index||ASTM D2270||170||164||169|
|Zinc, wt. %||ASTM D5185||0.085||0.07||0.085|
|Copper Strip Corrosion (3 hrs@100°C)||ASTM D130||-||1A||-|
|Title||Full Syn 0W-20||Full Syn 5W-20||Full Syn 5W-30|
|API SJ, SH, SG, SF||Meets Requirements||Meets Requirements||Meets Requirements|
|API SL||Meets Requirements||Meets Requirements||Meets Requirements|
|API SM||Meets Requirements||Meets Requirements||Meets Requirements|
|API SN||Meets Requirements||Meets Requirements||Meets Requirements|
|API SN Plus||Meets Requirements||Meets Requirements||Meets Requirements|
|Chrysler MS-6395||Meets Requirements||Meets Requirements||Meets Requirements|
|Ford WSS M2C947-A, WSS-M2C947-B1||Meets Requirements||-||-|
|Ford WSS M2C962-A1||Meets Requirements||-||-|
|GM 4718M||Meets Requirements||-||Meets Requirements|
|GM 6094M||Meets Requirements||Meets Requirements||Meets Requirements|
|ILSAC GF-4||Meets Requirements||Meets Requirements||Meets Requirements|
|ILSAC GF-5||Approved||Meets Requirements||Meets Requirements|
|Chrysler MS-10797||-||Meets Requirements||-|
|Ford WSS M2C945-B1, M2C945-A, M2C930-A, M2C153||-||Meets Requirements||-|
|Ford WSS M2C960-A1||-||Meets Requirements||-|
|Ford WSS M2C946-B1, M2C946-A, M2C929-A||-||-||Meets Requirements|
Information accurate as of December 12, 2023