Sinclair Full Synthetic 0W-20 Motor Oil
Sinclair Full Synthetic Motor Oil Passenger Car Motor Oil
Sinclair Full Synthetic 0W-20 Motor Oil delivers increased fuel mileage thanks to its pure, advanced formulation. In addition to outstanding protection and performance, it also provides the following benefits.
- Fully licensed by GM and meets or exceeds GM dexos1™ Gen 2 specifications for worldwide warranty requirements for all GM automotive gasoline engines currently in use.
- Amplifies horsepower and improves acceleration.
- Longer lasting and better engine protection versus conventional oils thanks to strong synthetic base oils and advanced technology that provides a strong barrier that controls friction, resists wear and prevents contact between metal surfaces.
- Engineered to handle extreme hot and cold conditions, stop-and-go traffic, recurrent short trips, heavy loads and dusty conditions.
- Meets or exceeds dexos1™ Gen 2, API SP and ILSAC GF-6 requirements.
Engineered with Today's Engines in Mind
OEMs have been advancing engine designs, and those new designs demand more from motor oil. Sinclair Full Synthetic 0W-20 Motor Oil has kept pace with engine advancements and is formulated to provide maximum performance.
Full Synthetic Motor Oil: Performance You'll Notice
Sinclair Full Synthetic 0W-20 Motor Oil – The benefits you demand.
Performance
Controls friction and wear over 80% better than current API requirements.¹
- Increased fuel economy and reduced fuel costs without losing engine protection and performance. You’ll also notice increased acceleration.
- Longer periods between oil changes.
- Formulated to handle the most severe conditions.
- 100% pure synthetic, with molecules that provide superior, long-lasting engine protection and performance.
Strength
Provides a strong oil film to avoid metal-to-metal contact, even under extreme stress.
- Unsurpassed wear protection.
- Enhanced friction reduction. Sinclair oils actually react to heat to form a critical barrier that reduces friction and protects metal surfaces.2
Durability
Stands up to the heat and shearing so it extends oil life.
- Engineered to handle the most severe or extreme conditions.
1 Based on Sequence IV Wear test.
2 To measure friction reduction benefits, engineers used the ball-on-disk traction test.
Applications
- All gasoline- and flex-fuel cars, light trucks and SUVs, including gasoline-electric hybrids, notably under severe conditions.
- Designed to protect turbochargers and emission control system catalysts.
- Ideal for vehicles operating on fuels up to E85 ethanol.
Industry/OEM Specifications
| API SP | Approved |
| dexos1® Gen2 | Approved |
| ILSAC GF-5 | Approved |
| ILSAC GF-6A | Approved |
| API SJ, SH, SG, SF | Meets Requirements |
| API SL | Meets Requirements |
| API SM | Meets Requirements |
| API SN | Meets Requirements |
| API SN Plus | Meets Requirements |
| Chrysler MS-6395 | Meets Requirements |
| Ford WSS M2C947-A, WSS-M2C947-B1 | Meets Requirements |
| Ford WSS M2C962-A1 | Meets Requirements |
| GM 4718M | Meets Requirements |
| GM 6094M | Meets Requirements |
| ILSAC GF-4 | Meets Requirements |
Typical Properties
| Boron, wt. % | ASTM D5185 | 0.023 |
| Calcium, wt. % | ASTM D5185 | 0.135 |
| Cold Cranking Simulator at (°C), cP | ASTM D5293 | 5800 (-35) |
| Color | ASTM D1500 | 3 |
| Flash Point °C | ASTM D92 | 226 |
| Flash Point °F | ASTM D92 | 439 |
| Foam Seq. III (Tendency/Stability), mL | ASTM D892 (Opt. A) | 0/0 |
| Foam Seq. II (Tendency/Stability), mL | ASTM D892 (Opt. A) | 5/0 |
| Foam Seq. I (Tendency/Stability), mL | ASTM D892 (Opt. A) | 0/0 |
| Gravity, °API | ASTM D287 | 35.66 |
| High Temperature Foaming, static foam | ASTM D6082 (Opt A) | 20/0 |
| High Temperature / High Shear Vis at 150°C, cP | ASTM D5481 | 2.7 |
| Magnesium, wt. % | ASTM D5185 | 0.059 |
| Molybdenum, wt. % | ASTM D5185 | 0.0079 |
| Nitrogen, wt. % | ASTM D4629 | 0.104 |
| Noack Volatility, % loss | ASTM D6375 | 13 |
| Phosphorus, wt. % | ASTM D5185 | 0.076 |
| Pour Point °C (°F) | ASTM D5950 | -45°C (-49°F) |
| Pumping Viscosity at (°C), cP | ASTM D4684 | 21,000 (-40) |
| Shear Stability, Final Viscosity in cSt | ASTM D6278 | 7.5 |
| Specific Gravity @ 60°F (15.6°C) | ASTM D4052 | 0.8465 |
| Sulfated Ash, wt. % | ASTM D874 | 0.9 |
| Sulfur, wt. % | ASTM D4951 | 0.3 |
| TBN, mgKOH/g | ASTM D2896 | 7.9 |
| Viscosity @ 100°C cSt | ASTM D445 | 8.475 |
| Viscosity @ 40°C cSt | ASTM D445 | 44.59 |
| Viscosity Index | ASTM D2270 | 170 |
| Zinc, wt. % | ASTM D5185 | 0.085 |
Container/Bulk Availability
| 6/1 Quart | Product Number - 848-014 |
| 55 Gallon Drum | Product Number - 848-003 |
| 330 Gallon Tote | Product Number - 730-002 |